Stubby holders are a great way to keep drinks cool. They are made out of neoprene or foam that does not conduct heat well and can help to keep your drink cold for longer periods of time.
They also help to prevent your hands from getting warm. This is especially important if you’re holding a hot beverage, such as coffee.
How to make a stubby holder
Stubby holders are a great way to keep your hands and table dry while drinking a cold beer. They can be personalised with your favourite artwork, logo or message and are available in a range of colours and styles. They are also a popular promotional item for businesses of all kinds, and make thoughtful wedding favours.
They are a fun and easy project to do at home if you have a few spare hours to burn and some basic supplies lying around the house. They’re also a great idea for kids and teens to have at their disposal when they’re stuck on the sofa and need something to do.
Firstly, you’ll need to find the most efficient way to apply your glue. A good option is to use rubber glue, as it dries quickly and is easy to work with. The best way to do this is to apply it in thin layers, allowing each layer to dry before applying the next.
In the process of gluing each layer, you may run into some snags along the way. For example, the glue may not adhere well to the neoprene. If this happens, you can try a coat of varnish to remedy the problem.
The best part about this project is that it’s pretty cheap to do and looks fantastic as a result! It’s also a great way to reuse some wetsuit offcuts and turn them into something useful.
Materials
Stubby holders, also known as can coolers and koozies in Australia, are a popular accessory for sports events and picnics. They keep beverages cool and can be personalised to fit your needs.
They are commonly made of foam or neoprene and are available in various sizes, colours and designs. Some are even collapsible for easy storage.
A stubby holder is an insulator that can be used to keep drinks cold for longer periods of time. They are often seen at sporting events and picnics, as well as at home to keep drinks cool while watching television or working in the yard.
The first stubby holder was invented in the 1980s and was initially made from polystyrene foam. While it was effective at keeping drinks cold, it was bulky and inconvenient to carry around.
In the mid-1980s, Shane Walsh from Australia created a model that was made from Neoprene, which is much more effective at keeping drinks cold than polystyrene. The neoprene stubby holder became very popular in Australia.
These neoprene drink sleeves are resistant to water, and they’re very elastic. They’re also incredibly easy to cut and shape into any size and shape.
They’re a great way to promote your brand at outdoor events and summer gatherings. You can even customise them with your own logo or image to make them a unique gift for your friends or family members!
To make your own stubby holder, all you need is a few items and some glue. Simply cut out a circular shape from the foam or neoprene, apply some glue to its edges, and insert it into a base. The base will hold the stubby holder until it dries.
Cutting the neoprene or foam
Neoprene is a synthetic rubber that can be shaped to fit a wide range of designs and applications. It is widely used in stubby holders, laptop cases, wetsuits and other apparel products. It is also highly resistant to water and UV rays.
Neoprene can be cut using several different methods, including hand-cutting or die cutting. The type of neoprene you’re working with will determine which method is best for you.
If you’re working with thin neoprene rubber sheets, hand-cutting is the preferred method. This method is simple and does not require the use of expensive machinery. However, if you’re working with thicker neoprene sheets or have a large volume of neoprene that you need to cut in a short amount of time, then die cutting may be the better option.
Laser cutters are another popular method of cutting neoprene. Lasers can be used with a variety of materials, including neoprene, and the heat from the laser can make it easier to cut through difficult neoprene products.
There are many types of laser cutters, and the right one for you will depend on your needs. Some lasers can cut through neoprene at a high speed, while others can only do so at a low speed.
Alternatively, a waterjet cutter is another common way to cut neoprene. Waterjets are not as precise as lasers, but they can be very effective. They can also be used for cutting through more challenging neoprene sheets, such as those with high durometers.
Once you’ve cut your neoprene or foam sheet, you can then apply glue to the edges of the material. You’ll want to smooth it out so that it doesn’t have any air bubbles or other lumps. Once the base has cured, insert it into your stubby holder.
Applying the glue
Glue is one of the main tools needed to make a stubby holder. You can use a variety of glues, but rubber glue is recommended. It will bond very well and also dries clear, which is important for stuffed animals and fabric.
Once you have chosen a glue, apply it to the neoprene or foam base. You will want to do this carefully and not get it too thick as this may cause the stubby holder to become unstable. Most glues need to ‘tack up’ for around thirty minutes before they are tacky enough to be applied to your stubby holder.
When the glue is tacked up, leave it to dry for a few hours. Then, insert the stubby holder into the base. You will need to be very gentle with the stubby holder as it could explode if it’s too hot. Once you’re sure the stubby holder isn’t going to explode, let it dry completely.
After it dries, you can add cool designs or messages to personalize your stubby holder. These could be the name of your favorite beer, a message or quote you like, or some cool artwork that you’ve created.
You can even decorate your stubby holder with buttons or googly eyes. These decorations are fun and easy to do, but be careful with small children as they can be choking hazards.
If you have a stubby holder with a tear in it, you can fix this using fabric glue or hot glue. This will help you fix the tear without exposing your stuffed animal to chemicals or making it more difficult for you to care for.
A stubby holder is an insulator that can be used to keep beverage containers and cans cold. These can be found in different colours and designs. They can also be used to advertise various products and services. They can be a great way to increase brand awareness and make your product stand out in a crowd.
Inserting the base into the stubby holder
Stubby holders are a popular accessory that helps to keep beverages cold. They can be used at outdoor events, like barbeques and picnics, or at home, where they are a great way to store drinks that are kept in the refrigerator.
They also make a great gift for friends and family members who enjoy drinking beer. They are available in a variety of colors and designs, so you can find one that will suit your taste.
The stubby holder is a good insulator and will help to keep your drink cool for longer periods of time. This is because the stubby holder is made from materials that do not conduct heat well. In addition, the stubby holder can also help to prevent your hands from getting cold when you hold a hot drink.
To make a stubby holder, you will need several materials. You will need neoprene or foam, a piece of rubber glue, and a base that will fit the stubby holder. The neoprene or foam can be cut to size, while the base can be crafted from a variety of materials.
Once you have your materials, you will need to put the stubby holder together. The easiest way to do this is to use books that are about 10 cm apart. You will need to place a book on top of the two books that are placed on each side of the stubby holder so that it will hold the stubby holder until it dries.
Once the stubby holder is glued together, it will need to be left to dry for thirty minutes. This will give the glue enough time to become tacky before you can insert it into the base.
